Size: 1/2" - 2" (DN15 - DN50)
Class: 800LB, 1500LB (PN10 - PN25)
Body Material: A105, A350 LF2, A182 F304(M)/ F316(M)/ F51...
Trim Material: A105+ENP, 13CR, SS304/ SS316, F304/ F316...
Seat & Seals: PTFE, R-PTFE, NYLON, DEVLON, PEEK...or Metal Sealing
Operation: Lever/ Wrench, Gear, Pneumatic/ Electic Actuator...
Design Basis: API 6D/ BS 5351(ISO 17292)/ ASME B16.34/ API 608...
Face-to-Face Dimension: ASME B16.10...
Flanged End: ASME B16.5
Butt-Welding End: ASME B16.25
Socket Welding End: ASME B16.11
Wall Thickness: ASME B16.34
Firesafe: API607, API 6FA
Inspection and Test: API 6D/ API 598/ BS 6755...
1.Forged ball valve feature
TSV forged ball valve,the forging material can ensure sufficient rigidity and strength under maximum rated operation pressure without inherent flaw of cast. Enough wall thickness of separate body and adaptation of high strength tie bolts are convenient for valve maintenance and sufficient to bear the stress of pipe.The internal parts of valve are carefully designed and selected to ensure reliability under all kinds of work condition.
2.Anti-fire safe design
When the trunnion ball valve be used normally,its sealed by seat and ball surface,seat retainer sealed by O-ring and body,this is soft sealed and reliable sealing.When the seat and O-ring are burnt,the seat retainer and body will be sealed by expanded graphite.Thus act anti-fire safe purpose.
In order to prevent friction among ball,stem and PTFE that generates static electricity which may light the combustibles and explosives that cause an accident,in this ball valve,static-conduction spring is set between the stem and the ball,the stem and the body.Thus static electricity is conducted to ground and system safety is secured.
4.Free leakage of body Sealed construction
The connective position of valve body and bonnet is double sealed by gasket and O-ring, on this base,such factors as fire,high temperature,shock and uneven opening or closing of the torque all can��t induce external leakage.
5.Low torque in operation
The self-lubricated bearings are installed at the friction of stem,resulting in wear resistance, flexibility of operation and low torque.
6.Automatic body cavity relief
When the body pressure going up un-normally as the unstable factor,the trunnion ball valve downstream seat will be pushed by un-normally pressure,and the release the unnormal pressure automatically,it doesn't damage to the sealing of upstream seat.The un-normally pressure which in the floating ball valve body will release the pressure into the upstream pipe directly,it doesn't damage to the sealing of the downstream seat.
7.Various driving types
The top pad of valve designed according to ISO 5211,which is convenient for connection and exchange of various drivers.The common driving types are manual,electrical,pneumatic and pneumatic/hydraulic.